Review A Product

Fatmax® Xtreme™ High Velocity Framing Hammer - Rip Claw - 14oz

Rating:

Fatmax® Xtreme™ High Velocity Framing Hammer - Rip Claw - 14oz

Features and Benefits:

  • Revolutionary mig welded hammer desing means a 14oz hammer that swings like a 20oz
  • 100% steel for strength and durability
  • Light weight design reduces arm stress
  • 75% larger strike face for bigger sweet spot and better accuracy
  • Exclusive dual tempered head rims & claw reduces steel chipping & cracking
STANLEY LOGOXTHT1-51123
Length in mm370
Weight head in g397
Lenght head in mm155
Weight head in oz14

Fatmax® Xtreme™ High Velocity Framing Hammer - Rip Claw - 14oz

Here’s where you have your say. Upload a video and / or write a review of the product to share your experience with others! Give the product your star rating out of five, write or record your review and share any top tips on how to get the best out of it. Thanks!

Rate it:

You have a problem with your javascript

Leaving a Review

To make sure that we can use your review there are a few simple rules:

  1. Written reviews need to be a minimum of 50 characters
  2. Keep it clean!! Nothing offensive, defamatory or illegal

Easy isn't it! So let's have your thoughts on our products

Fatmax® Xtreme™ High Velocity Framing Hammer - Rip Claw - 14oz

by Corkybhoy - Electrician - Tue 28 February

Absolutely tremendous hammer. the first time i showed it to the guys on site and in the office they were intrigued by the strange design at first but were soon wanting a shot and asking where and when could they buy one of could i give them mine. NOT A CHANCE was my reply.

The rip claw makes it so much easier to get into the nooks and crannies when taking out old nails and clips in lofts.

Ideal hammer for everyday use!

Top Tip: Dont leave lying around or it may go walkies!

was this useful?

yes

026 people found this useful

Have your say about this review on the forum

by stevie28 - Roofer - Sat 25 February

The first time I picked this up I thought it was something the kids might like to play with, it feels so light. Now if they want a shot they'll have to buy their own. The weight and balance is perfect meaning you can use it for long periods without fatigue setting in. It also hits just as hard as any other hammer but without the loss of accuracy heavier hammers bring.

As I not the tallest of people the magnetic nail starter is great for overhead work meaning I can drive in nails without the need to find something to stand on. The power and accuracy that the hammer generates also makes this easier.

The rip claw makes it a very useful tool for removing burnt out or stripped screws without theshaft getting in the road like a curved claw hammer.

Perhaps though the best thing about the hammer are the looks, certain to get people asking about it and lets face it who doesnt like showing off their new tools.

All in all a very useful addition to your tool bag whether in the trade or a diyer, the light weight, accuracy and power will make you look good whatever your level of expertise.

Top Tip: Keep it close to make sure it doesn't walk

was this useful?

yes

030 people found this useful

Have your say about this review on the forum

by dickllewellyn - Electrician - Thu 23 February

What can I say. From the outset this alien looking thing looked odd next to my tried and trusted Estwing. There were a number of concerns I had to start with, first I'd never really used a hammer with a straight claw, and second the hammer I use most regularly was a 16oz wheras this new fangled 14oz was claiming to beat a standard 20oz.

Having heard the hype, tried the "lab condition" tests, the real world beckoned!

I can honestly say my 16oz Estwing has taken a back seat in my "secondary" tool box now, with my tool bag being home to this bad boy along with a 12oz ball peign hammer. Rarely do I go back out to the van for the old one now, other than wwhen I need a curved claw to get old cut nails out of joists when I've got boards up.

Talking of getting boards up, the straight claw has been a god send! I really was sceptical of this, but it has definately proved itself, and I only wish I'd discovered it sooner!

If I had one gripe it's that there is a beveled edge to the hammer face which means I cant get into tight corners etc like I can with the old hammer. Otherwise the light weight means I can take it steady with little tacks, drive big nails in with ease, lift boards, and even (don't tell stanley) use the nice straight claw for making holes in plasterboard!! The large head also makes it quite nice for chisels and the like.

Top Tip: Tell your mates to give it back and buy their own!

was this useful?

yes

023 people found this useful

Have your say about this review on the forum

by Ian Clarke - Electrician - Mon 20 February

You have to look twice at this hammer at first you think you might be going rock climbing alot of thought and research and design has gone into this it feels great in your hand and very light very good ergonomic grip for long days at work. And after using this hammer i was amazed because its so light so you get less tired and because of that you are more accurate especially over head work. Finish is great and build quality just need to put it through its paces over a few years know.

Top Tip: Don't be put off by the design pick it up and give it a try and feel the differance.

was this useful?

yes

027 people found this useful

Have your say about this review on the forum

by john - Carpenter / Joiner - Mon 30 January

Have been using this all today and its a really sad day! I think my trusty Blue Strike is looking at retirement, This does everything that it has done over the years but is just lighter and tires your arm less. The large head virtually eliminates mishits which means less wasted time. When you first pick it up you cannot believe it will do the same job as a heavier hammer but it absolutely does. Putting it in the loop on your trousers you barely notice it is there. If you use a hammer a lot every day switch to this you will notice the difference through the reduced weight, equally if you struggle with skewed nails and leaving halfpenny marks from missing then switch to this as the bigger head gives you a much bigger margin for error. Using it for striking chisels gives no jarring up the arm too. It is an investment and looks a bit different but worth it. I'll still keep the Blue Strike tucked away safely though just incase!

Top Tip: Dont put it through the wash as its so light you might not notice its still on your trousers

was this useful?

yes

040 people found this useful

Have your say about this review on the forum

Latest Forum Topics:

  • Lets talk power tools   
    Mon May 14, 2012 12:33 pm
    So 2 simple questions What’s your favourite brand of power tool and why?????? I used to be completely wrapped up by Makita power tools mainly because that’s what i used for the whole of my apprenti... more
  • Stanley Tungsten Carbide Blades - FEEDBACK   
    Sun Apr 08, 2012 9:22 pm
    OK then gents, I will assume that most of you have put the new Tungsten Carbide Utility blades to the test by now. So be honest - what's the feedback? Most of the folk I've seeded them with have conc... more
  • FatMax Xtreme High Velocity Hammers - FEEDBACK   
    Wed Mar 21, 2012 10:44 pm
    This time I want some good honest feedback on the Xtreme High Velocity Hammers. You've all had them now for a while and I assume that you've had a good few weeks of out of them on site. So what's th... more
  • Insulated screwdrivers   
    Wed Mar 21, 2012 8:13 pm
    Afternoon all. I am in need of a new set of insulated screwdrivers, and don't know what to buy. I always used Irazola in the past as they were comfortable, and the guarantee meant that if we ever bro... more
  • Hand Saws - What are you using?   
    Thu Mar 08, 2012 11:26 pm
    A few questions for you all on hand saws: * What do you buy (JetCut, 244, 880, Predator) and why? * 20 or 22" - and why? (why we don't just make a 21" and be done with it is beyond me) * Ho... more